Azio AWU212N User Manual

User Manual Network Interface Rev. 1.02 SRP-F310 SRP-F312 http://www.bixolon.com

Network Interface 5) Select the Wireless LAN tab, and then select “Use Windows to configure my wireless network settings.” Click the [Advanced]

Network Interface 7) Click the [Add] button. 8) Enter “BIXOLON_adhoc” as the Network name (SSID). Select the connection, even if the network is no

Network Interface 9) Click the “Connect” tab and check “Connect when this network is in range.” 10) Check whether the settings are updated as show

Network Interface 2-3 Initial Wireless LAN Connection (Windows VISTA, Windows 7) When wireless utility program is installed, you have to set the wir

Network Interface 3) Click the “Change adapter settings”. Click the “wireless network adaptor’s Properties”. 4) Select Internet Protocol Version

Network Interface 5) Set the IP settings as shown below, and then click OK. 6) Click the “Manage wireless networks”. Rev.1.02 - 15 -

Network Interface 7) Click the “Add”. 8) Click the “Create an ad hoc network”. Rev.1.02 - 16 -

Network Interface 9) Click the “Next”. 10) ‘Network name’ = BIXOLON_adhoc, ‘Security type’ = Open, ‘Save this network’ check, and then cli

Network Interface 11) Click the “Close”. 12) After completing configuration, Bixolon_adhoc network will be created. When the printer is set to

Network Interface 3. Configuration LAN Setting Values Classification Item Remarks Input Range Home LAN setting status display Printer Name

Network Interface Table of Contents 1. Specifications...

Network Interface WLAN Setting Values Classification Item Remarks Input Range Home WLAN setting status display Printer Name Printer Name

Network Interface 3-1 Configuration Tool Install SRP-F310 PSP and excute it from the CD. (Start>>BIXOLON>>SRP-F310 POS Software Pack

Network Interface LAN Configuration When you press the Search button, the SRP-F310 printer connected to the network will be shown in the list. The f

Network Interface Select the SRP-F310 printer from the list and press the [Setting] button, and then the following window for setting Ethernet setti

Network Interface When you log in, you will see the web browser for changing the Ethernet and WLAN settings as shown below. WLAN Configuration W

Network Interface Select the SRP-F310 printer from the list and press the [Setting] button, and then the following window for changing the WLAN sett

Network Interface Select the SRP-F310 printer from the list and press the [Configuration(web)] button, and then the Login window will pop up. Enter

Network Interface You can search for the information of the wireless network by pressing the BSS Info button. When you press the BSS Info but

Network Interface 3-2 Web Browser SRP-F310 supports the security enhanced https protocol as well as http. When SSL of the webserver of SRP-F310 is e

Network Interface When the ID and Password match the ones registered in the printer, the following window will be opened. Both LAN and WLAN can be

Network Interface 1. Specifications (1) WLAN USB Adapter (IEEE 802.11b/g) SRP-F310 requires WLAN USB adapter to use the wireless LAN function. SRP-F3

Network Interface Wireless LAN selection Home, System, Protocol, Network (WLAN), and Authentication can be configured from this window, and the wiz

Network Interface 3-3 FTP The configuration files will be downloaded and uploaded to and from the current path. In the following case, the current pa

Network Interface The contents of the f310.config file are as follows. * The format of the configuration file is “Configuration item: Setting value

Network Interface 3-4 Telnet Enter “telnet Printer IP”. Enter the ID and Password set for the printer. The screen related to the network confi

Network Interface 4. SMTP The changes of the status of the printer are monitored, and a notification e-mail is sent to the registered administrators

Network Interface Click the Configuration button to display the following window. Check the SMTP setting values SMTP User ID Check

Network Interface 5. Ethernet/WLAN Test by using Windows Test Page You can use the Windows printer driver as shown below when there is no test progr

Network Interface 4) Select the “Ports” tab from the “Properties” window. 5) Click “Add Port…” Rev.1.02 - 37 -

Network Interface 6) Select “Standard TCP/IP Port” and click “New Port...” 7) Click the [Next] button in the “Add Standard TCP/IP Printer Port Wiza

Network Interface 9) Click the [Next] button in the “Additional Port Information Required” window. [Note] - Click the [Next] button to proceed with

Network Interface RT2070sta chipset ManufacturerName PREMIERTEK PL-H5DN-3070 TP-Link TL-WN321G 8712u chipset(support 802.11 b/g/n) ManufacturerNam

Network Interface 12) Click the “Configure Port...” button in the “Properties” window. 13) Enter the same number as the local port number set durin

Network Interface 14) Click [OK] when you finish entering the required values, and then click the [Apply] button. 15) Select the “General” tab in

Network Interface 6. Factory Reset This function changes the Ethernet and WLAN settings of the printer to the initial factory settings. Method In or

Network Interface Factory Reset Values Printer Name SRP-F310 / 312 Printer Port Number 9100 User ID admin Printer Name User Password password FTP

Network Interface 7. Troubleshooting When printing doesn’t work Check network setting When using Ethernet - IP Address Check whether the IP Address

Network Interface - Port Check whether the port configured in the printer and the host (PC, PDA) are the same. - Authentication / Encryption Check th

Network Interface On the other hand, if there is a reply as shown below, then the corresponding IP is used by another network terminal and it cannot b

Network Interface 2. How to Connect Both Ethernet and WLAN can be configured through the printer’s Ethernet interface. Likewise, both Ethernet and W

Network Interface (2) Checking Network Setting 1) Function Key Pressing the Function Key while the power is ON will print the LAN/WLAN

Network Interface 2) Self-test While the printer is turned off, turn on the printer while pressing the feed button. The printer setting values will t

Network Interface 2-1 Initial Wireless LAN Connection (Windows 2000) Windows 2000 does not support wireless network stting. When you use Windows 20

Network Interface 3) Select Internet Protocol (TCP/IP), and then click Properties. 4) Set the IP settings as shown below, and then click OK. R